Pear Cut Lab Grown Diamond Halo Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 8

$955.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Halo

Center

Pear Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Halo

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	Details
Center diamond	Pear Cut · 8.20 × 5.70 mm · approx. 1.12 ct
Accent diamonds	56 round brilliant diamonds · approx. 0.42 ct total
Total diamond weight	approx. 1.54 ct · 57 stones
Stone type	Lab Grown Diamond
Setting	Three-prong pear halo with open basket and split cathedral micro pavé shank
Finish · Occasion	High Polish · Engagement

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear Cut	8.20 × 5.70 mm	1	1.12 ct
Round Brilliant	0.007–0.009 ct each	22	0.18 ct
Round Brilliant	0.006–0.008 ct each	34	0.24 ct
Total	—	57	1.54 ct

At a glance

A pear cut lab grown diamond halo engagement ring from Signora Jewels.

An 8.20 × 5.70 mm pear center weighing approx. 1.12 ct sits in a three-prong halo setting, with 56 round accents totaling approx. 0.42 ct. Approx. 1.54 ct total.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Choose your preferred metal from the options on this page.

Signora Jewels sets the 1.12 ct pear inside a close halo that follows its tapered outline from rounded base to pointed tip. Three prongs leave the shoulders of the 8.20 × 5.70 mm center exposed, while the open basket gives a cleaning brush room beneath the stone.

The shank divides before reaching the halo. Both cathedral arms carry micro pavé, so the 34 shoulder diamonds pull the eye inward toward the 22-stone halo rather than stopping at the band. From the side, the split structure supports the raised center without filling the gallery with metal.

Design highlights

1.12 ct pear cut center diamond
22-stone pear halo totaling approx. 0.18 ct
Split cathedral shank with 34 micro pavé diamonds
Three-prong center setting
Open basket gallery beneath the pear center
Approx. 1.54 ct total across 57 diamonds

The split shoulders create a clear opening beneath the halo, while the pavé lines continue around both sides of the finger. Browse more halo engagement rings, compare diamond outlines in the diamond stone guide, or review precious metals in the metal guide.

About Lab Grown Diamonds

A pear cut combines a rounded lower half with a narrow point, so the setting has to support two very different ends. Here, the upper prong guards the tip while the lower prongs hold the broader curve. The round halo repeats that outline and adds a crisp white border around the center.

Metal, Care & Fit

White Gold and Platinum keep the halo visually connected to the center. Yellow or Rose Gold creates a stronger outline around the setting. Clean between the 22 halo stones, beneath the open basket and along both pavé shoulders with warm water, mild soap and a soft brush. A curved band will sit closest beneath the raised pear halo.

FAQ

How is the pointed tip of the pear diamond protected?
The upper prong covers the pointed end of the 8.20 × 5.70 mm center, while two lower prongs secure its rounded base.

What does the halo add to this pear design?
Twenty-two round diamonds add approx. 0.18 ct and trace the pear outline, making the center read larger without changing its tapered shape.

Will a straight wedding band sit flush beside this ring?
The raised halo and split cathedral shoulders create a contour near the center, so a curved band gives the closest fit.

How should the split pavé shank be cleaned?
Brush along both cathedral arms and beneath the open basket, where lotion and soap collect around the 34 shoulder diamonds.

Your cart is empty