Pear Cut Lab Grown Diamond Cluster Engagement Ring

IGI Report IncludedMade to OrderInsured Delivery

1 of 9

$804.00

Price updates with your selections

Independently graded by IGI IGI Report Included Selected 0.50 ct+ lab-grown center or primary diamond · IGI grading report · Signora Jewelry Certificate included. 1 ct lab-grown diamond · IGI report · Signora Certificate included.

Understand your certificates →Certificate details →

Metal:

Center Diamond:

Choose your fit

Ring size Choose one

Forever, A & J

Live preview

Engraving 0 / 20

Complimentary · hand-engraved to order · adds about 3–4 days.

Estimated dispatch: 7 business days Duties & taxes prepaid

Ring size guide

Lay a ring you own flat on the circle and slide until it sits just inside it — or set its inner diameter directly.

Measure the inside of a ring that already fits — inner edge to edge — with a ruler in mm, then set it below. No ring handy? Try Measure your finger.

14 mm 24 mm 17.3 mm

Inner diameter mm

US size

UK size

EU size

Circumference

54.3 mm

Between sizes? Always choose the larger size. Fingers are slightly bigger in the evening — measure then for the best fit.

Method 1 — Use an existing ring

Find a ring that fits the intended finger comfortably.
Place it flat and measure the inner diameter (inside edge to inside edge) in mm.
Enter that measurement in the Measure a ring tab.

Method 2 — Wrap and measure

Wrap a thin strip of paper around the base of your finger.
Mark where it overlaps — measure that length in mm (your circumference).
Divide by 3.1416 (π) to get your diameter, then use the Measure a ring tab.

Tip: Middle finger sizes typically run half a size larger than the ring finger. If between sizes, go up. Measure in the evening — fingers are slightly larger then.

7US size

US	UK	EU	Diameter	Circumference

Highlighted row = your converted size. Most common women's sizes are US 6–7. All measurements in mm.

Selected: —

The Signora Promise

Hand-finished in SuratMade to order

Reports where statedExact scope shown

Insured deliverySigned & tracked

Secure checkoutShopify checkout

Standard-design returns30-day eligibility

Final inspectionChecked before dispatch

About This Ring

Pear Cut · Cluster

Center

Pear Cut

Carat

1 ct

Customizable

Metal

Customizable

Setting

Cluster

An independent IGI grading report is included when the selected individual lab-grown center or primary diamond is 0.50 ct or larger.

Detail	In the photos	Customizable
Center diamond	Pear · 14.2 × 9.2 mm · approx. 5.00 ct	1–5 ct
Accent diamonds	14 diamonds · approx. 0.45 ct total	Scales with center
Total diamond weight	approx. 5.45 ct · 15 stones	Varies with center size
Stone type	Lab Grown Diamond	—
Setting	Four-Prong with clustered side stones	Scales with center
Band	Sculptural leaf-and-vine shoulders	—
Finish · Occasion	High Polish · Engagement, Anniversary, Bridal	—

Diamond details

Shape	Size	Qty	Weight (approx.)
Pear center	14.2 × 9.2 mm	1	5.00 ct
Pear accents	—	2	0.30 ct total
Marquise accents	—	4	0.10 ct total
Round accents	—	8	0.05 ct total
Total	—	15	5.45 ct

At a glance

A pear lab grown diamond nature-inspired engagement ring from Signora Jewels.

The photographed design centers a 5.00 ct pear measuring approximately 14.2 × 9.2 mm, framed by 14 pear, marquise and round accent diamonds totaling approximately 0.45 ct. Approx. 5.45 ct total.

Made to order in 11 metals: silver, 9K/14K/18K gold (yellow, white, rose) and platinum.

Each metal color is shown in the photos. Choose your center weight and metal from the options on this page.

Signora Jewels builds the composition outward from the 14.2 × 9.2 mm pear center. Two pear sides, four marquise leaves and eight small rounds sit among sculpted gold vines, so the shoulders read as branches rather than a straight row of stones.

The setting rises approximately 9.50 mm at the photographed 5.00 ct center. Leaf-shaped prongs grip the center while the shoulders spread to about 4.50 mm, then narrow to a 2.40 mm lower shank. The open spaces between the vines keep the metalwork visible instead of turning the sides into a continuous diamond band.

Design highlights

5.00 ct reference pear center measuring approximately 14.2 × 9.2 mm
Two pear side diamonds totaling approximately 0.30 ct
Four marquise leaf diamonds totaling approximately 0.10 ct
Eight round accents totaling approximately 0.05 ct
Sculptural leaf-and-vine shoulders with open spaces between the branches
Approx. 4.50 mm shoulders tapering to a 2.40 mm lower shank

The side stones are part of the drawing rather than a separate halo. Pears extend the center outward, marquise cuts echo the metal leaves, and the small rounds punctuate the vine as it travels down the shoulders. Explore more engagement rings, compare shapes in the diamond stone guide, or review the available finishes in the metal guide.

Diamond & Ring Details

Specification	Details
Center stone	Pear · 14.2 × 9.2 mm · approx. 5.00 ct in the photographed design
Accent stones	2 pear + 4 marquise + 8 round · approx. 0.45 ct total
Total weight / count	approx. 5.45 ct · 15 stones in the photographed design
Setting	Four-Prong with clustered side stones
Band	Nature-inspired leaf-and-vine shoulders
Band details	Approx. 2.40 mm lower width · 1.95 mm lower thickness · 4.50 mm shoulder width
Setting height	Approx. 9.50 mm at the 5.00 ct reference weight
Center options	1 ct, 1.5 ct, 2 ct, 2.5 ct, 3 ct, 3.5 ct, 4 ct, 4.5 ct, 5 ct
Finish	High Polish

Measurements are approximate. The selected center weight determines the final diamond dimensions, setting proportions and total diamond weight.

About Lab Grown Diamonds

The pear center combines a rounded lower half with a pointed tip, giving the 5.00 ct reference stone a long 14.2 × 9.2 mm face-up outline. The pear and marquise accents repeat that tapered geometry along the shoulders, while the small rounds break up the pattern with compact points of light.

Metal, Care & Fit

The photographed construction uses approximately 7.40 g of 18K gold before the diamonds are set. Yellow and rose gold make the vines and leaf-shaped prongs easiest to distinguish; white gold and platinum keep the stones and metalwork closer in tone. Use warm water, mild soap and a soft brush around the open branches, where lotion can collect behind the accent settings.

FAQ

What do the side diamonds add to this pear engagement ring?
Fourteen accent diamonds add approximately 0.45 ct around the center. Two pear cuts extend the main stone outward, four marquise cuts form leaf-like points, and eight rounds fill smaller spaces along the vine shoulders.

How high does the 5 ct reference center sit?
The photographed setting is approximately 9.50 mm high. The raised center clears the sculptural side clusters while the shoulders rise beneath the basket for additional support.

Will the leaf-and-vine shoulders feel like a wide band?
The shoulders reach approximately 4.50 mm near the center but taper to about 2.40 mm at the bottom. Open spaces between the branches remove some of the visual and physical bulk of a solid 4.50 mm shank.

How should I clean the small diamonds between the leaves?
Use a soft brush with warm water and mild soap around the pear, marquise and round accents. Brush from both the top and underside of the open vine sections so residue does not remain behind the smaller stones.

Which metal gives the botanical details the most contrast?
Yellow and rose gold make the sculpted vines and leaf-shaped prongs stand apart clearly from the diamonds. White gold and platinum shift more attention toward the mixed-shape stones while retaining the same botanical structure.

Your cart is empty